RAM Mounts
Products from RAM Mount allow you to mount accessories in your vehicle in a stable but at the same time very flexible way. Choose from a wide range of bases, various connections and a large number of accessories that fit precisely or can be used variably. Combine the individual products to create an individual holder that optimally solves your problem.
No results were found for the filter!
Tough-Track ![RM-833-Schiene-JEEP.jpg]( "RM-833-Schiene-JEEP.jpg")
With the RAM Tough-Track rail system, the possibilities for mounting on flat surfaces are almost endless for off-road vehicles, cars, combine harvesters, motorboats, tractors,...
Mounting set, 1 in. ![RM-605_Befestigungsset_100.jpg]( "RM-605_Befestigungsset_100.jpg")
This set is the ideal start for your RAM Mount system. The set consists of two diamond shaped bases (RM-101-10238) and one double socket arm (RM-502-10201).
Docking station ![RM-841-Dockingstation-HoneywellRT10.jpg]( "RM-841-Dockingstation-HoneywellRT10.jpg")
This tablet holder is the ultimate mounting solution for the robust Honeywell RT10 tablet. The tablet is charged via the pogo pin contacts when docked. Power is supplied via the...
Magnetic base, 1.5 in. ![RM-321-Magnetbasis-150.jpg]( "RM-321-Magnetbasis-150.jpg")
This round magnetic base is a good foundation for your individual RAM Mount system. This circular base has a diameter of 6,35cm (2.5 "). Three strong magnets in a protective...
Magnet-Basis, 1 Zoll ![RM-311_Magnetbasis_100.jpg]( "RM-311_Magnetbasis_100.jpg")
Mit dieser runden Magnet-Basis wird eine gute Grundlage für Ihren individuellen Halter von RAM Mount geschaffen. Diese runde Basis hat einen Durchmesser von 6,35 cm (2,5"). Drei...
Magnetic adapter ![RM-814_Adapter.jpg]( "RM-814_Adapter.jpg")
This simple adapter fits your new or existing round base with 6.35 cm diameter. Note: Due to the limited retention force of the magnets we suggest to only use this mount with 1"...
Cheese plate set, 3,38 in. ![RM-233-Basis-Lochplatten-338.jpg]( "RM-233-Basis-Lochplatten-338.jpg")
A functioning RAM mount system always consists of a base, a connection and a device carrier. The choice of the right components creates a good basis for your individual holder....
Cheese plate set, 2,25 in. ![RM-232-Basis-Lochplatten-225.jpg]( "RM-232-Basis-Lochplatten-225.jpg")
A functioning RAM mount system always consists of a base, a connection and a device carrier. The choice of the right components creates a good basis for your individual holder....
Cheese plate set, 1,5 in. ![RM-133_Basis.jpg]( "RM-133_Basis.jpg")
A functioning RAM mount system always consists of a base, a connection and a device carrier. The choice of the right components creates a good basis for your individual holder....
Cheese plate ![RM-213.jpg]( "RM-213.jpg")
A RAM mount system always consists of a base, a compound and a device carrier. The choice of the right components marks a good start for your individual holder. This solution...
Bolt ball, 1/2 in. NPT ![RM-126_Kugelbolzen_NPT_150.jpg]( "RM-126_Kugelbolzen_NPT_150.jpg")
A bolt ball is the most simple kind of base for your RAM mount system. This bolt ball is a 1.5" ball attached to a female 1/2" NPT thread. Tip: This base can also be used as...
Bolt ball, 1,5 in. ![RM-107.jpg]( "RM-107.jpg")
A bolt ball is the most simple kind of base for your RAM mount system. This bolt ball is a 1.5" ball attached to a male M10x1.25 thread. Tip: This base can also be used as...
Bolt ball, 1 in. ![RM-103_Basis_100.png]( "RM-103_Basis_100.png")
A bolt ball is the most simple kind of base for your RAM mount system. This bolt ball is a 1" ball attached to a male M10x1.5 thread. Tip: This base can also be used as device...
Adhesive Base, 1 in. ![RM-316_Klebebasis_100.jpg]( "RM-316_Klebebasis_100.jpg")
Lightweight RAM mount systems can also be glued. This round base with 1" ball has a flexible rubber support surface so that uneven surfaces are also suitable for mounting.
Clamp base, 1 in. ![RM-227_Klammerbasis_100.jpg]( "RM-227_Klammerbasis_100.jpg")
This special basic clamp enables light RAM systems to be attached, for example, to a car side window edge lip or a glare shield on an airplanercraft.
Camera base, 1.5 in. ![RM-714.jpg]( "RM-714.jpg")
The RAM mount system as a tripod? Why not? There is certainly no quicker way to mount a camera on a vehicle. Of course other devices that are equipped with a 3/8" thread can...