EN - Switch to homepage
0

RAM Mounts

Products from RAM Mount allow you to mount accessories in your vehicle in a stable but at the same time very flexible way. Choose from a wide range of bases, various connections and a large number of accessories that fit precisely or can be used variably. Combine the individual products to create an individual holder that optimally solves your problem.

Filter
Filter
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
1 From 7
No results were found for the filter!
NEW
Expansion pouch RM-816_Expansionskissen.jpg
If the Tough-Wedge™ seat wedge mount does not fit right away because the gap is too large, you can add extra volume with this expansion pouch.
Track base, 1.5 in. RM-317.jpg
A track base allows the direct attachment of a RAM Mount system to an already mounted accessory rail. For example, the bases are suitable for Airline tracks, Gear Trac,...
PDA holder PDA holder
This universal mount allows you to securely attach your PDA. The holder is suitable for devices with a height of 120.65-158.75 mm and a width of 57.15-85.55 mm. The PDA is...
Tough-Track RM-833-Schiene-JEEP.jpg
With the RAM Tough-Track rail system, the possibilities for mounting on flat surfaces are almost endless for off-road vehicles, cars, combine harvesters, motorboats, tractors,...
Mounting set, 1 in. RM-605_Befestigungsset_100.jpg
This set is the ideal start for your RAM Mount system. The set consists of two diamond shaped bases (RM-101-10238) and one double socket arm (RM-502-10201).
Docking station RM-841-Dockingstation-HoneywellRT10.jpg
This tablet holder is the ultimate mounting solution for the robust Honeywell RT10 tablet. The tablet is charged via the pogo pin contacts when docked. Power is supplied via the...
Bolt ball, 1/2 in. NPT RM-126_Kugelbolzen_NPT_150.jpg
A bolt ball is the most simple kind of base for your RAM mount system. This bolt ball is a 1.5" ball attached to a female 1/2" NPT thread. Tip: This base can also be used as...
Bolt ball, 1,5 in. RM-107.jpg
A bolt ball is the most simple kind of base for your RAM mount system. This bolt ball is a 1.5" ball attached to a male M10x1.25 thread. Tip: This base can also be used as...
Bolt ball, 1 in. RM-103_Basis_100.png
A bolt ball is the most simple kind of base for your RAM mount system. This bolt ball is a 1" ball attached to a male M10x1.5 thread. Tip: This base can also be used as device...
Adhesive Base, 1 in. RM-316_Klebebasis_100.jpg
Lightweight RAM mount systems can also be glued. This round base with 1" ball has a flexible rubber support surface so that uneven surfaces are also suitable for mounting.
Clamp base, 1 in. RM-227_Klammerbasis_100.jpg
This special basic clamp enables light RAM systems to be attached, for example, to a car side window edge lip or a glare shield on an airplanercraft.
Camera base, 1.5 in. RM-714.jpg
The RAM mount system as a tripod? Why not? There is certainly no quicker way to mount a camera on a vehicle. Of course other devices that are equipped with a 3/8" thread can...
Camera base, 1 in. RM-720.jpg
The RAM mount system as a tripod? Why not? There is certainly no quicker way to mount a camera on a vehicle. This special adapter was made for the GoPro system for a quick and...
Handi-Case™ RM-719.jpg
The Handi-Case is really usable in many ways. Use it as a document holder and blotter, as a storage for documents, pens and else or as a rugged transport box. It comes supplied...
GoPro set RM-608_GoPro-Set_100.jpg
This set is the ideal start for your RAM Mount system. The set consists of a suction cup base (RM-304-10224), one short double socket arm (RM-500-10201) and one camera holder...
Cup holder, 1 inch RM-717.jpg
Granted, using it only as a drink holder a RAM Mount system slightly oversteps the mark. But if you already have such a system in operation, why not take advantage of the high...
1 From 7