EN - Switch to homepage
0

RAM Mounts

Products from RAM Mount allow you to mount accessories in your vehicle in a stable but at the same time very flexible way. Choose from a wide range of bases, various connections and a large number of accessories that fit precisely or can be used variably. Combine the individual products to create an individual holder that optimally solves your problem.

Filter
Filter
 
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
1 From 7
No results were found for the filter!
NEW
Expansion pouch RM-816_Expansionskissen.jpg
If the Tough-Wedge™ seat wedge mount does not fit right away because the gap is too large, you can add extra volume with this expansion pouch.
NEW
Tab-Tite RM-706.jpg
The tablet holders of the Tab-Tite-series are suitable not only for iPads. They are the optimal device carrier for thicker tablets or e.g. when a heavy duty case is used to...
NEW
X-Grip set for smartphones, 1 in. RM-620.jpg
The principle of the X-Grip holders is as easy as pie. A phone or tablet is placed between the ends of two rubberized-intersecting arms, which are then drawn together by a...
NEW
Quick Draw™ RM-846-QuickDraw.jpg
The spring-loaded docking station is particularly suitable for Zebra TC8000 and TC8300 handheld terminals. It can be connected to a variety of RAM mounting systems, allowing the...
Bolt ball, 1/2 in. NPT RM-126_Kugelbolzen_NPT_150.jpg
A bolt ball is the most simple kind of base for your RAM mount system. This bolt ball is a 1.5" ball attached to a female 1/2" NPT thread. Tip: This base can also be used as...
Tablet holder Zebra RM-773-Tablethalter-Zebra.jpg
The RAM-HOL-ZE25PU is a robust vehicle mount with integrated charging function for Zebra ET60 and ET65 tablets in IntelliSkin cases. It has been specially developed for...
Zebra scanner holder RM-769-Scannerhalter-Zebra.jpg
The RAM-HOL-ZE6-NPU holder was specially developed for Zebra TC51, TC52, TC56, and TC57 devices. Its form-fitting design ensures a secure hold and quick access to all controls....
IntelliSkin Zebra RM-771-IntelliSkin-Zebra-TC53-TC58.jpg
The GDS Skin ZE34 is an IntelliSkin protective cover for the Zebra TC53 and TC58 models. It reliably protects the device from bumps, scratches, and wear and tear, while also...
GDS Dock Zebra RM-768-GDS-Zebra-TC2x-TC5x.jpg
The GDS Dock V12 ZE2434CPU is a powerful vehicle mount with integrated power supply for Zebra TC2x and TC5x devices in IntelliSkin cases. It connects directly to the vehicle's...
RMG ball adapter, 1 in. RM-329-RMG-Basis.jpg
The RAM RMG-B-351-M8-20U is a robust aluminum ball adapter with an M8 female thread and a 1-inch B ball. It forms a stable base for versatile mounting on industrial profiles,...
GDS power supply RM-862-GDS-Netzteil.jpg
RAM Mounts' GDS Charge power supplies ensure a stable power supply for your GDS docks and holders in your vehicle. They connect directly to the vehicle's electronics and provide...
Rectangular base, 1.5 in. RM-108.jpg
This rectangular base is a good foundation for your individual RAM Mount system. The base measures 3.8x6.3 cm (1.5" x 2.5") and has four holes at a distance of 2.54x5.08 cm (1"...
No-Drill vehicle base RM-664-NoDrill.jpg
{\rtf1\ansi\deff0\nouicompat{\fonttbl{\f0\fnil\fcharset0 Microsoft Sans Serif;}} {\*\generator Riched20 10.0.26100}\viewkind4\uc1 \pard\f0\fs17\lang1031 No-drill vehicle mounts...
John Deere base, 1.5 inches RM-160-JD-Basis.jpg
Base developed specifically for John Deere with a 1.5-inch ball (size C). It can be screwed onto the John Deere GS2600 or GS2630 displays for a perfect fit.
Track base, 1 in. RM-328_Basis_100.jpg
A track base allows the direct attachment of a RAM Mount system to an already mounted accessory rail. For example, the bases are suitable for Airline tracks, Gear Trac,...
Track base RM-314_Schienen-Basis.jpg
A track base allows the direct attachment of a RAM Mount system to an already mounted accessory rail. For example, the bases are suitable for Airline tracks, Gear Trac,...
1 From 7