Components
RAM Mounts®™ holds everything-everywhere and safe!
When the going gets tough and everything flies through the cockpit, RAM Mounts is your third hand. And your fourth! And fifth!
RAM Mounts is the adaptable mounting system for electronic devices and accessories. Whether it's a cell phone, clipboard, GPS tracker, mug, camera, radio: RAM Mounts provides a secure hold even in the most difficult terrain, or in the hectic workday in the warehouse.
Translated with DeepL
No results were found for the filter!
NEW
Bicycle mount EZ-ON/OFF 
The handlebar mount consists of the EZ-ON/OFF base with two straps and a swiveling diamond adapter. The cable ties can be adjusted to secure the mount to a wide variety of...
NEW
Expansion pouch ![RM-816_Expansionskissen.jpg]( "RM-816_Expansionskissen.jpg")
If the Tough-Wedge™ seat wedge mount does not fit right away because the gap is too large, you can add extra volume with this expansion pouch.
NEW
Rubber fin replacements
These rubber fins serve as replacements for the slats in the Power-Grip scanner holder. The replaceable elastomer slats securely grip the scanner's handle to ensure the firmest...
NEW
Rail base, 1 in. ![RM-240-Buegelbasis-100.png]( "RM-240-Buegelbasis-100.png")
A RAM mount system always consists of a base, a compound and a device carrier. This base is a good start for your individual holder. This rail base has especially been designed...
Built-in charging socket ![RM-845-USB-Ladebuchse.jpg]( "RM-845-USB-Ladebuchse.jpg")
The RM-845-00000 Dual USB In-Vehicle Charger allows devices to be charged simultaneously via USB-A and USB-C. This compact in-vehicle solution is suitable for vehicles,...
Bolt ball, 1/2 in. NPT ![RM-126_Kugelbolzen_NPT_150.jpg]( "RM-126_Kugelbolzen_NPT_150.jpg")
A bolt ball is the most simple kind of base for your RAM mount system. This bolt ball is a 1.5" ball attached to a female 1/2" NPT thread. Tip: This base can also be used as...
RMG ball adapter, 1 in. ![RM-329-RMG-Basis.jpg]( "RM-329-RMG-Basis.jpg")
The RAM RMG-B-351-M8-20U is a robust aluminum ball adapter with an M8 female thread and a 1-inch B ball. It forms a stable base for versatile mounting on industrial profiles,...
Rectangular base, 1.5 in. ![RM-108.jpg]( "RM-108.jpg")
This rectangular base is a good foundation for your individual RAM Mount system. The base measures 3.8x6.3 cm (1.5" x 2.5") and has four holes at a distance of 2.54x5.08 cm (1"...
John Deere base, 1.5 inches ![RM-160-JD-Basis.jpg]( "RM-160-JD-Basis.jpg")
Base developed specifically for John Deere with a 1.5-inch ball (size C). It can be screwed onto the John Deere GS2600 or GS2630 displays for a perfect fit.
Track base, 1 in. ![RM-328_Basis_100.jpg]( "RM-328_Basis_100.jpg")
A track base allows the direct attachment of a RAM Mount system to an already mounted accessory rail. For example, the bases are suitable for Airline tracks, Gear Trac,...
Track base ![RM-314_Schienen-Basis.jpg]( "RM-314_Schienen-Basis.jpg")
A track base allows the direct attachment of a RAM Mount system to an already mounted accessory rail. For example, the bases are suitable for Airline tracks, Gear Trac,...
Track base, 1.5 in. ![RM-317.jpg]( "RM-317.jpg")
A track base allows the direct attachment of a RAM Mount system to an already mounted accessory rail. For example, the bases are suitable for Airline tracks, Gear Trac,...
Tough-Track ![RM-851-ToughTrack.jpg]( "RM-851-ToughTrack.jpg")
With the RAM Tough-Track rail system, the possibilities for mounting on flat surfaces are almost endless for off-road vehicles, cars, combine harvesters, motorboats, tractors,...
Mounting set, 1 in. ![RM-605_Befestigungsset_100.jpg]( "RM-605_Befestigungsset_100.jpg")
This set is the ideal start for your RAM Mount system. The set consists of two diamond shaped bases (RM-101-10238) and one double socket arm (RM-502-10201).
Round base, 1 in. ![RM-100_Basis_100.png]( "RM-100_Basis_100.png")
This round base is a good foundation for your individual RAM Mount system. This base has a diameter of 6.35 cm (2.5") and has four holes in industry standard AMPS (rectangular...
Clamp base, 3.38 in. ![RM-216.jpg]( "RM-216.jpg")
A RAM mount system always consists of a base, a compound and a device carrier. This base is a good start for your individual holder. With this clamp base there is no need of...